SH7750_08 Datasheet, PDF (1011/1162 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

Section 22 Electrical Characteristics
Item
Symbol Min Max Unit Figure
Standby return oscillation settling time 2 t
OSC3
Standby return oscillation settling time 3 t_OSC4
5
—
ms 22.7
5
—
ms 22.8
Standby return oscillation settling time 1* t_OSC2
2
—
ms
Standby return oscillation settling time 2*
Standby return oscillation settling time 3*
IRL interrupt determination time
(RTC used, standby mode)
t_OSC3
t
OSC4
t_IRLSTB
2
—
ms
2
—
ms
—
200 μs 22.10
TRST reset hold time
t
0
TRSTRH
—
ns 22.3, 22.5
Notes: When a crystal resonator is connected to EXTAL and XTAL, the maximum frequency is
34 MHz. When a 3rd overtone crystal resonator is used, an external tank circuit is
necessary.
The maximum load capacitance to be connected to CKIO pin should be 50 pF in PLL2
operation, because there is a feedback from CKIO pin.
* When the oscillation settling time of a crystal resonator is lower than or equal to 1 ms.
Rev.7.00 Oct. 10, 2008 Page 927 of 1074
REJ09B0366-0700