PIC16LF18854 Datasheet, PDF (436/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
29.5.9
EDGE-TRIGGERED MONOSTABLE
MODES
The Edge-Triggered Monostable modes start the timer
on an edge from the external Reset signal input, after
the ON bit is set, and stop incrementing the timer when
the timer matches the PRx period value. The following
edges will start the timer:
• Rising edge (MODE<4:0> = 10001)
• Falling edge (MODE<4:0> = 10010)
• Rising or Falling edge (MODE<4:0> = 10011)
When an Edge-Triggered Monostable mode is used in
conjunction with the CCP PWM operation the PWM
drive goes active with the external Reset signal edge
that starts the timer, but will not go active when the
timer matches the PRx value. While the timer is incre-
menting, additional edges on the external Reset signal
will not affect the CCP PWM.
DS40001824A-page 436
Preliminary
 2016 Microchip Technology Inc.