PIC16LF18854 Datasheet, PDF (236/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
REGISTER 12-47: LATE: PORTE DATA LATCH REGISTER
U-0
—
bit 7
U-0
U-0
U-0
U-0
—
—
—
—
R/W-x/u
LATE2
R/W-x/u
LATE1
R/W-x/u
LATE0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-3
bit 2-0
Unimplemented: Read as ‘0’
LATE<2:0>: PORTE Output Latch Value bits⁽¹⁾
Note 1: Writes to PORTE are actually written to the corresponding LATE register. Reads from the PORTE register
is return of actual I/O pin values.
REGISTER 12-48: ANSELE: PORTE ANALOG SELECT REGISTER
U-0
—
bit 7
U-0
U-0
U-0
U-0
R/W-1/1
R/W-1/1
R/W-1/1
—
—
—
—
ANSE2
ANSE1
ANSE0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-3
bit 2-0
Unimplemented: Read as ‘0’
ANSE<2:0>: Analog Select between Analog or Digital Function on pins RE<2:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input⁽¹⁾. Digital input buffer disabled.
Note 1: When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
DS40001824A-page 236
Preliminary
 2016 Microchip Technology Inc.