PIC16LF18854 Datasheet, PDF (263/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
REGISTER 15-10: IOCEP: INTERRUPT-ON-CHANGE PORTE POSITIVE EDGE REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W/HS-0/0
U-0
—
—
—
IOCEP3
—
U-0
U-0
—
—
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
HS - Bit is set in hardware
bit 7-4
bit 3
bit 2-0
Unimplemented: Read as ‘0’
IOCEP3: Interrupt-on-Change PORTE Positive Edge Enable bit
1 = Interrupt-on-Change enabled on the pin for a positive-going edge. IOCCFx bit and IOCIF flag will
be set upon detecting an edge.
0 = Interrupt-on-Change disabled for the associated pin
Unimplemented: Read as ‘0’
REGISTER 15-11: IOCEN: INTERRUPT-ON-CHANGE PORTE NEGATIVE EDGE REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W/HS-0/0
U-0
—
—
—
IOCEN3
—
U-0
U-0
—
—
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
HS - Bit is set in hardware
bit 7-4
bit 3
bit 2-0
Unimplemented: Read as ‘0’
IOCEN3: Interrupt-on-Change PORTE Negative Edge Enable bit
1 = Interrupt-on-Change enabled on the pin for a negative-going edge. IOCCFx bit and IOCIF flag will
be set upon detecting an edge.
0 = Interrupt-on-Change disabled for the associated pin
Unimplemented: Read as ‘0’
 2016 Microchip Technology Inc.
Preliminary
DS40001824A-page 263