PIC16LF18854 Datasheet, PDF (228/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
REGISTER 12-38: SLRCOND: PORTD SLEW RATE CONTROL REGISTER
R/W-1/1
R/W-1/1
R/W-1/1
R/W-1/1
R/W-1/1
R/W-1/1
SLRD7
SLRD6
SLRD5
SLRD4
SLRD3
SLRD2
bit 7
R/W-1/1
SLRD1
R/W-1/1
SLRD0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
SLRD<7:0>: PORTD Slew Rate Enable bits
For RD<7:0> pins, respectively
1 = Port pin slew rate is limited
0 = Port pin slews at maximum rate
REGISTER 12-39: INLVLD: PORTD INPUT LEVEL CONTROL REGISTER
R/W-1/1
R/W-1/1
R/W-1/1
R/W-1/1
R/W-1/1
R/W-1/1
INLVLD7
INLVLD6
INLVLD5 INLVLD4 INLVLD3
INLVLD2
bit 7
R/W-1/1
INLVLD1
R/W-1/1
INLVLD0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
INLVLD<7:0>: PORTD Input Level Select bits
For RD<7:0> pins, respectively
1 = ST input used for PORT reads and interrupt-on-change
0 = TTL input used for PORT reads and interrupt-on-change
DS40001824A-page 228
Preliminary
 2016 Microchip Technology Inc.