PIC16LF18854 Datasheet, PDF (401/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
REGISTER 26-5: MDCARL: MODULATION LOW CARRIER CONTROL REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W-x/u
R/W-x/u
R/W-x/u
—
—
—
MDCLS<3:0>⁽¹⁾
R/W-x/u
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-4
bit 3-0
Unimplemented: Read as ‘0’
MDCLS<3:0> Modulator Data High Carrier Selection bits ⁽¹⁾
1111 = LC4_out
1110 = LC3_out
1101 = LC2_out
1100 = LC1_out
1011 = NCO output
1010 = PWM7_out
1001 = PWM6_out
1000 = CCP5 output (PWM Output mode only)
0111 = CCP4 output (PWM Output mode only)
0110 = CCP3 output (PWM Output mode only)
0101 = CCP2 output (PWM Output mode only)
0100 = CCP1 output (PWM Output mode only)
0011 = Reference clock module signal (CLKR)
0010 = HFINTOSC
0001 = FOSC
0000 = Pin selected by MDCARLPPS
Note 1: Narrowed carrier pulse widths or spurs may occur in the signal stream if the carrier is not synchronized.
 2016 Microchip Technology Inc.
Preliminary
DS40001824A-page 401