PIC16LF18854 Datasheet, PDF (278/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
18.10 CWG1 Auto-shutdown Source
The output of the comparator module can be used as
an auto-shutdown source for the CWG1 module. When
the output of the comparator is active and the
corresponding ASxE is enabled, the CWG operation
will be suspended immediately (see Section 20.10
“Auto-Shutdown”).
18.11 Operation in Sleep Mode
The comparator module can operate during Sleep. The
comparator clock source is based on the Timer1 clock
source. If the Timer1 clock source is either the system
clock (FOSC) or the instruction clock (FOSC/4), Timer1
will not operate during Sleep, and synchronized
comparator outputs will not operate.
A comparator interrupt will wake the device from Sleep.
The CxIE bits of the PIE2 register must be set to enable
comparator interrupts.
DS40001824A-page 278
Preliminary
 2016 Microchip Technology Inc.