PIC16LF18854 Datasheet, PDF (119/668 Pages) Microchip Technology – C Compiler Optimized RISC Architecture

PIC16(L)F18856/76
6.4.4 RESET OR WAKE-UP FROM SLEEP
The FSCM is designed to detect an oscillator failure
after the Oscillator Start-up Timer (OST) has expired.
The OST is used after waking up from Sleep and after
any type of Reset. The OST is not used with the EC
Clock modes so that the FSCM will be active as soon
as the Reset or wake-up has completed. Therefore, the
device will always be executing code while the OST is
operating.
FIGURE 6-10:
FSCM TIMING DIAGRAM
Sample Clock
System
Clock
Output
Clock Monitor Output
(Q)
OSCFIF
Oscillator
Failure
Failure
Detected
Note:
Test
Test
Test
The system clock is normally at a much higher frequency than the sample clock. The relative frequencies in
this example have been chosen for clarity.
 2016 Microchip Technology Inc.
Preliminary
DS40001824A-page 119