S912XHZ512F1VAG Datasheet, PDF (899/978 Pages) Freescale Semiconductor, Inc – Covers MC9S12XHZ384, MC9S12XHZ256

Appendix A Electrical Characteristics
4 _{Refer to Section A.1.4, “Current Injection” for more details}
5 _{Parameter only applies in stop or pseudo stop mode.}
Table A-7. I/O Characteristics for Port C, D, PE5, PE6, and PE7
for Reduced Input Voltage Thresholds
Conditions are 4.5 V < V_DD5 < 5.5 V Temperature from –40°C to +140°C, unless otherwise noted
Num C
Rating
Symbol
Min
Typ
1 P Input high voltage
2 P Input low voltage
3 C Input hysteresis
VIH
1.75
—
VIL
—
—
VHYS
—
100
Max
Unit
—
V
0.75
V
—
mV
A.1.10 Supply Currents
This section describes the current consumption characteristics of the device as well as the conditions for
the measurements.
A.1.10.1 Measurement Conditions
All measurements are without output loads. Unless otherwise noted the currents are measured in single
chip mode and the CPU and XGATE code is executed from RAM, V_DD5=5.5V, internal voltage regulator
is enabled and the bus frequency is 40MHz using a 4-MHz oscillator in loop controlled Pierce mode.
Production testing is performed using a square wave signal at the EXTAL input.
MC9S12XHZ512 Data Sheet, Rev. 1.06
Freescale Semiconductor
899