S912XHZ512F1VAG Datasheet, PDF (541/978 Pages) Freescale Semiconductor, Inc – Covers MC9S12XHZ384, MC9S12XHZ256

Chapter 14 Freescale’s Scalable Controller Area Network (S12MSCANV3)
• The transmission buffer with the lowest local priority field wins the prioritization.
In cases of more than one buffer having the same lowest priority, the message buffer with the lower index
number wins.
Module Base + 0x00XD
Access: User read/write⁽¹⁾
7
R
PRIO7
W
6
PRIO6
5
PRIO5
4
PRIO4
3
PRIO3
2
PRIO2
1
PRIO1
0
PRIO0
Reset:
0
0
0
0
0
0
0
0
Figure 14-36. Transmit Buffer Priority Register (TBPR)
1. Read: Anytime when TXEx flag is set (see Section 14.3.2.7, “MSCAN Transmitter Flag Register (CANTFLG)”) and the
corresponding transmit buffer is selected in CANTBSEL (see Section 14.3.2.11, “MSCAN Transmit Buffer Selection Register
(CANTBSEL)”)
Write: Anytime when TXEx flag is set (see Section 14.3.2.7, “MSCAN Transmitter Flag Register (CANTFLG)”) and the
corresponding transmit buffer is selected in CANTBSEL (see Section 14.3.2.11, “MSCAN Transmit Buffer Selection Register
(CANTBSEL)”)
14.3.3.5 Time Stamp Register (TSRH–TSRL)
If the TIME bit is enabled, the MSCAN will write a time stamp to the respective registers in the active
transmit or receive buffer right after the EOF of a valid message on the CAN bus (see Section 14.3.2.1,
“MSCAN Control Register 0 (CANCTL0)”). In case of a transmission, the CPU can only read the time
stamp after the respective transmit buffer has been flagged empty.
The timer value, which is used for stamping, is taken from a free running internal CAN bit clock. A timer
overrun is not indicated by the MSCAN. The timer is reset (all bits set to 0) during initialization mode. The
CPU can only read the time stamp registers.
Module Base + 0x00XE
Access: User read/write⁽¹⁾
7
R TSR15
6
TSR14
5
TSR13
4
TSR12
3
TSR11
2
TSR10
1
TSR9
0
TSR8
W
Reset:
x
x
x
x
x
x
x
x
Figure 14-37. Time Stamp Register — High Byte (TSRH)
1. Read: Anytime when TXEx flag is set (see Section 14.3.2.7, “MSCAN Transmitter Flag Register (CANTFLG)”) and the
corresponding transmit buffer is selected in CANTBSEL (see Section 14.3.2.11, “MSCAN Transmit Buffer Selection Register
(CANTBSEL)”)
Write: Unimplemented
MC9S12XHZ512 Data Sheet Rev. 1.06
Freescale Semiconductor
541