S912XHZ512F1VAG Datasheet, PDF (576/978 Pages) Freescale Semiconductor, Inc – Covers MC9S12XHZ384, MC9S12XHZ256

Chapter 15 Serial Communication Interface (S12SCIV5)
15.3.2.9 SCI Data Registers (SCIDRH, SCIDRL)
Module Base + 0x0006
7
6
5
4
3
2
1
0
R
R8
0
0
0
0
0
0
T8
W
Reset
0
0
0
0
0
0
0
0
= Unimplemented or Reserved
Figure 15-12. SCI Data Registers (SCIDRH)
Module Base + 0x0007
7
6
5
4
3
2
1
0
R
R7
R6
R5
R4
R3
R2
R1
R0
W
T7
T6
T5
T4
T3
T2
T1
T0
Reset
0
0
0
0
0
0
0
0
Figure 15-13. SCI Data Registers (SCIDRL)
Read: Anytime; reading accesses SCI receive data register
Write: Anytime; writing accesses SCI transmit data register; writing to R8 has no effect
Table 15-13. SCIDRH and SCIDRL Field Descriptions
Field
SCIDRH
7
R8
SCIDRH
6
T8
SCIDRL
7:0
R[7:0]
T[7:0]
Description
Received Bit 8 — R8 is the ninth data bit received when the SCI is configured for 9-bit data format (M = 1).
Transmit Bit 8 — T8 is the ninth data bit transmitted when the SCI is configured for 9-bit data format (M = 1).
R7:R0 — Received bits seven through zero for 9-bit or 8-bit data formats
T7:T0 — Transmit bits seven through zero for 9-bit or 8-bit formats
NOTE
If the value of T8 is the same as in the previous transmission, T8 does not
have to be rewritten.The same value is transmitted until T8 is rewritten
In 8-bit data format, only SCI data register low (SCIDRL) needs to be
accessed.
When transmitting in 9-bit data format and using 8-bit write instructions,
write first to SCI data register high (SCIDRH), then SCIDRL.
MC9S12XHZ512 Data Sheet, Rev. 1.06
576
Freescale Semiconductor