SH7729R Datasheet, PDF (801/855 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

24.3.10 AC Characteristic Test Conditions
I/O signal reference level: VccQ/2 (VccQ = 3.3 ± 0.3 V, Vcc = 1.55 V to 2.15 V)
Input pulse level: Vss to 3.0 V (where RESETP, RESETM, ASEMD0, IRL3 to IRL0, IRLS3 to
IRLS0, ADTRG, PINT15 to PINT0, TRST, RxD1, CA, NMI, IRQ5–IRQ0, CKIO, and
MD5–MD0 are within Vss to Vcc)
Input rise and fall times: 1 ns
I_OL
SH7729R output pin
C_L
DUT output
V_REF
I_OH
Notes: 1. C_L is the total value that includes the capacitance of measurement instruments, etc.,
and is set as follows for each pin.
30pF: CKIO, RAS, CAS, CS0, CS2−CS6, CE2A, CE2B, BACK
50pF: All other pins
2. I_{OL and} I_OH are the values shown in table 24.3.
Figure 24.59 Output Load Circuit
Rev. 5.0, 09/03, page 755 of 806