SH7729R Datasheet, PDF (268/855 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

5. Register specifications
BARA = H'00000500, BAMRA = H'00000000, BBRA = H'0057, BARB = H'00001000,
BAMRB = H'00000000, BBRB = H'0057, BDRB = H'00000000, BDMRB = H'00000000,
BRCR = H'00300001, BETR = H'0005
Specified conditions: Channel A/channel B independent mode
• Channel A
Address: H'00000500, Address mask: H'00000000
Bus cycle: CPU/instruction fetch (before instruction execution)/read/longword
• Channel B
Address: H'00001000, Address mask: H'00000000
Data:
H'00000000, Data mask: H'00000000
Bus cycle: CPU/instruction fetch (before instruction execution)/read/longword
Execution-times break enabled (5 times)
On channel A, a user break occurs before the instruction at address H'00000500 is executed.
On channel B, a user break occurs before the fifth instruction execution after the instruction at
address H'00001000 has been executed four times.
6. Register specifications
BARA = H'00008404, BAMRA = H'00000FFF, BBRA = H'0054, BARB = H'00008010,
BAMRB = H'00000006, BBRB = H'0054, BDRB = H'00000000, BDMRB = H'00000000,
BRCR = H'00000400, BASRA = H'80, BASRB = H'70
Specified conditions: Channel A/channel B independent mode
• Channel A
Address: H'00008404, Address mask: H'00000FFF, ASID: H'80
Bus cycle: CPU/instruction fetch (after instruction execution)/read (operand size is not
included in the condition)
• Channel B
Address: H'00008010, Address mask: H'00000006, ASID: H'70
Data:
H'00000000, Data mask: H'00000000
Bus cycle: CPU/instruction fetch (before instruction execution)/read (operand size is not
included in the condition)
A user break occurs after an instruction with ASID = H'80 and address H'00008000 to
H'00008FFE is executed or before instructions with ASID = H'70 and addresses H'00008010
to H'00008016 are executed.
Rev. 5.0, 09/03, page 222 of 806