SH7080 Datasheet, PDF (759/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 13 Port Output Enable (POE)
Initial
Bit
Bit Name
value R/W Description
10
MTU2SP1CZE 1
R/W* MTU2S Port 1 Output Comparison/High-Impedance
Enable
This bit specifies whether to compare output levels for
the MTU2S high-current PE16/TIOC3BS and
PE17/TIOC3DS pins and to place them in high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, POE7F, and MTU2SHIZ bits is set
to 1.
0: Does not compare output levels or place the pins in
high-impedance state
1: Compares output levels and places the pins in
high-impedance state
9
MTU2SP2CZE 1
R/W* MTU2S Port 2 Output Comparison/High-Impedance
Enable
This bit specifies whether to compare output levels for
the MTU2S high-current PE18/TIOC4AS and
PE20/TIOC4CS pins and to place them in high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, POE7F, and MTU2SHIZ bits is set
to 1.
0: Does not compare output levels or place the pins in
high-impedance state
1: Compares output levels and places the pins in
high-impedance state
8
MTU2SP3CZE 1
R/W* MTU2S Port 3 Output Comparison/High-Impedance
Enable
This bit specifies whether to compare output levels for
the MTU2S high-current PE19/TIOC4BS and
PE21/TIOC4DS pins and to place them in high-
impedance state when the OSF2 bit is set to 1 while
the OCE2 bit is 1 or when any one of the POE4F,
POE5F, POE6F, POE7F, and MTU2SHIZ bits is set
to 1.
0: Does not compare output levels or place the pins in
high-impedance state
1: Compares output levels and places the pins in
high-impedance state
Rev. 3.00 May 17, 2007 Page 701 of 1582
REJ09B0181-0300