SH7080 Datasheet, PDF (1196/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 21 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
14
PE3MD2 0
R/W PE3 Mode
13
PE3MD1 0
12
PE3MD0 0
R/W Select the function of the PE3/TEND1/TIOC0D/TDO
R/W
pin. Fixed to TDO output when using E10A (in
ASEMD0 = low).
000: PE3 I/O (port)
001: TIOC0D I/O (MTU2)
010: TEND1 output (DMAC)*
Other than above: Setting prohibited
11

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
10
PE2MD2 0
R/W PE2 Mode
9
PE2MD1 0
R/W Select the function of the PE2/DREQ1/TIOC0C/TDI
8
PE2MD0 0
R/W ^{pin. Fixed to TDI input when using E10A (in ASEMD0}
= low).
000: PE2 I/O (port)
001: TIOC0C I/O (MTU2)
010: DREQ1 input (DMAC)
Other than above: Setting prohibited
7

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
6
PE1MD2 0
R/W PE1 Mode
5
PE1MD1 0
R/W Select the function of the PE1/TEND0/TIOC0B/TRST
4
PE1MD0 0
R/W
pin. Fixed to TRST input when using E10A (in
ASEMD0 = low).
000: PE1 I/O (port)
001: TIOC0B I/O (MTU2)
010: TEND0 output (DMAC)*
Other than above: Setting prohibited
3, 2

All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
Rev. 3.00 May 17, 2007 Page 1138 of 1582
REJ09B0181-0300