SH7080 Datasheet, PDF (1167/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 21 Pin Function Controller (PFC)
• Port D Control Register L2 (PDCRL2)
Bit: 15 14 13 12 11 10 9
8
7
6
5
4
3
2
1
0
-
PD7 PD7 PD7
MD2 MD1 MD0
-
PD6 PD6 PD6
MD2 MD1 MD0
-
PD5 PD5 PD5
MD2 MD1 MD0
-
PD4 PD4 PD4
MD2 MD1 MD0
Initial value: 0
0
0 0*¹ 0
0
0 0*¹ 0
0
0 0*¹ 0
0
0 0*¹
R/W: R R/W R/W R/W R R/W R/W R/W R R/W R/W R/W R R/W R/W R/W
Note: 1. The initial value is 1 in the on-chip ROM disabled external-extension mode.
Initial
Bit
Bit Name Value R/W Description
15

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
14
PD7MD2 0
R/W PD7 Mode
13
PD7MD1 0
R/W Select the function of the PD7/D7/TIC5WS pin.
12
PD7MD0 0*¹
R/W 000: PD7 I/O (port)
001: D7 I/O (BSC)*²
010: TIC5WS input (MTU2S)
Other than above: Setting prohibited
11

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
10
PD6MD2 0
R/W PD6 Mode
9
PD6MD1 0
R/W Select the function of the PD6/D6/TIC5VS pin.
8
PD6MD0 0*¹
R/W 000: PD6 I/O (port)
001: D6 I/O (BSC)*²
010: TIC5VS input (MTU2S)
Other than above: Setting prohibited
7

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
Rev. 3.00 May 17, 2007 Page 1109 of 1582
REJ09B0181-0300