SH7080 Datasheet, PDF (1356/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 23 Flash Memory
When the new bit rate is selectable, the boot program returns an ACK code to the host and then
makes the register setting to select the new bit rate. The host then sends an ACK code at the
new bit rate, and the boot program responds to this with another ACK code, this time at the
new bit rate.
Acknowledge H'06
 Acknowledge H'06 (1 byte): The ACK code sent by the host to acknowledge the new bit
rate.
Response
H'06
 Response H'06 (1 byte): The ACK code transferred in response to acknowledgement of the
new bit rate
The sequence of new bit rate selection is shown in figure 23.25.
Host
Wait for one-bit
period at the current
bit rate setting
Setting the new
bit rate
New bit rate setting
H'06 (ACK)
H'06 (ACK) at the new bit rate
H'06 (ACK) at the new bit rate
Boot program
New bit rate setting
Figure 23.25 Sequence of New Bit Rate Selection
Rev. 3.00 May 17, 2007 Page 1298 of 1582
REJ09B0181-0300