SH7080 Datasheet, PDF (1177/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 21 Pin Function Controller (PFC)
• Port D Control Register L4 (PDCRL4)
Bit: 15
-
Initial value: 0
R/W: R
14 13 12 11
-
PD15 PD15
MD1 MD0
-
0
0 0*¹ 0
R R/W R/W R
10 9
8
7
-
PD14 PD14
MD1 MD0
-
0
0 0*¹ 0
R R/W R/W R
6
5
4
3
-
PD13 PD13
MD1 MD0
-
0
0 0*¹ 0
R R/W R/W R
Note: 1. The initial value is 1 in the on-chip ROM disabled external-extension mode.
2
1
0
-
PD12 PD12
MD1 MD0
0
0 0*¹
R R/W R/W
Initial
Bit
Bit Name Value R/W Description
15, 14 
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
13
PD15MD1 0
R/W PD15 Mode
12
PD15MD0 0*¹
R/W Select the function of the PD15/D15/TIOC4DS pin.
00: PD15 I/O (port)
01: D15 I/O (BSC)*²
11: TIOC4DS I/O (MTU2S)
Other than above: Setting prohibited
11, 10 
All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
9
PD14MD1 0
R/W PD14 Mode
8
PD14MD0 0*¹
R/W Select the function of the PD14/D14/TIOC4CS pin.
00: PD14 I/O (port)
01: D14 I/O (BSC)*²
11: TIOC4CS I/O (MTU2S)
Other than above: Setting prohibited
7, 6

All 0
R
Reserved
These bits are always read as 0. The write value
should always be 0.
5
PD13MD1 0
R/W PD13 Mode
4
PD13MD0 0*¹
R/W Select the function of the PD13/D13/TIOC4BS pin.
00: PD13 I/O (port)
01: D13 I/O (BSC)*²
11: TIOC4BS I/O (MTU2S)
Other than above: Setting prohibited
Rev. 3.00 May 17, 2007 Page 1119 of 1582
REJ09B0181-0300