SH7080 Datasheet, PDF (64/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 1 Overview
Items
Specification
Serial communication • Clock synchronous or asynchronous mode
interface with FIFO
(SCIF)
• Separate 16-byte FIFO registers for transmission and reception
• One channel
Synchronous serial
communication unit
(SSU)
• Master mode or slave mode selectable
• Standard mode or bidirectional mode selectable
• Transmit/receive data length can be selected from 8, 16, and 32 bits.
• Full-duplex communication (transmission and reception executed
simultaneously)
• Consecutive serial communication
I²C bus interface 2
(I²C2)
• One channel
• Conforming to Philips I²C bus interface
• Master mode and slave mode supported
• Continuous transfer
• I²C bus format or clock synchronous serial format selectable
• One channel
A/D converter (ADC) • 10 bits × 8 channels (in SH7083/SH7084/SH7085)
• 10 bits × 16 channels (in SH7086)
• Conversion request by external triggers, MTU2, or MTU2S
• Two sample-and-hold function units (two channels can be sampled
simultaneously) (in SH7083/SH7084/SH7085)
• Three sample-and-hold function units (three channels can be sampled
simultaneously) (in SH7086)
I/O ports
• 65 general input/output pins and eight general input pins (SH7083)
• 76 general input/output pins and eight general input pins (SH7084)
• 100 general input/output pins and eight general input pins (SH7085)
• 118 general input/output pins and 16 general input pins (SH7086)
• Input or output can be selected for each bit
Packages
• TQFP1414-100 (0.5 pitch) (SH7083)
• LQFP2020-112 (0.65 pitch) (SH7084)
• LQFP2020-144 (0.5 pitch) (SH7085)
• LQFP2424-176 (0.5 pitch) (SH7086)
Power supply voltage • Vcc: 3.0 to 3.6 V or 4.5 to 5.5 V
• AVcc: 4.5 to 5.5 V
Rev. 3.00 May 17, 2007 Page 6 of 1582
REJ09B0181-0300