SH7080 Datasheet, PDF (1212/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 21 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
6
PE5MD2 0
R/W PE5 Mode
5
PE5MD1 0
R/W Select the function of the
4
PE5MD0 0
R/W ^{PE5/CS6/CE1B/TIOC1B/TXD3/AUDATA1 pin. Fixed}
to AUDATA1 output when using the AUD function of
the E10A.
000: PE5 I/O (port)
001: TIOC1B I/O (MTU2)
010: TXD3 output (SCIF)
101: CS6/CE1B output (BSC)*
Other than above: Setting prohibited
3

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
2
PE4MD2 0
R/W PE4 Mode
1
PE4MD1 0
R/W Select the function of the
0
PE4MD0 0
R/W ^{PE4/IOIS16/TIOC1A/RXD3/AUDATA2 pin. Fixed to}
AUDATA2 output when using the AUD function of the
E10A.
000: PE4 I/O (port)
001: TIOC1A I/O (MTU2)
010: RXD3 input (SCIF)
101: IOIS16 input (BSC)*
Other than above: Setting prohibited
Note: * This function is enabled only in the on-chip ROM enabled/disabled external-extension
mode. Do not set 1 in single-chip mode.
Rev. 3.00 May 17, 2007 Page 1154 of 1582
REJ09B0181-0300