SH7080 Datasheet, PDF (1200/1644 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperH™ RISC engine Family

Section 21 Pin Function Controller (PFC)
Initial
Bit
Bit Name Value R/W Description
11

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
10
PE10MD2 0
R/W PE10 Mode
9
PE10MD1 0
R/W Select the function of the
8
PE10MD0 0
R/W
PE10/TIOC3C/TXD2/SSO/TDI pin. Fixed to TDI input
when using E10A (in ASEMD0 = low).
000: PE10 I/O (port)
001: TIOC3C I/O (MTU2)
010: TXD2 output (SCI)
101: SSO I/O (SSU)
Other than above: Setting prohibited
7

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
6
PE9MD2 0
R/W PE9 Mode
5
PE9MD1 0
R/W Select the function of the
4
PE9MD0 0
R/W
PE9/TIOC3B/SCK3/RTS3/TRST pin. Fixed to TRST
input when using E10A (in ASEMD0 = low).
000: PE9 I/O (port)
001: TIOC3B I/O (MTU2)
011: SCK3 I/O (SCIF)
100: RTS3 output (SCIF)
Other than above: Setting prohibited
3

0
R
Reserved
This bit is always read as 0. The write value should
always be 0.
Rev. 3.00 May 17, 2007 Page 1142 of 1582
REJ09B0181-0300