HD6417706 Datasheet, PDF (518/709 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series

17.1.7 Port G Control Register (PGCR)
Port G Control Register (PGCR) is a 16-bit read/write register that selects the pin functions and
the input pull-up MOS control. PGCR is initialized to H'AAAA (in case of ASEMD0 = 1) or
H'A800 (in case of ASEMD0 = 0) by power-on resets; however, it is not initialized by manual
resets, in standby mode, or in sleep mode.
Bit
15, 13
14, 12
11
10
9
8
7
6
5
4
3
2
Bit Name Initial Value R/W
—
All 1
R
—
All 0
R
PG5MD1 1
R/W
PG5MD0 0
R/W
PG4MD1 1/0
R/W
PG4MD0 0
R/W
PG3MD1 1/0
R/W
PG3MD0 0
R/W
PG2MD1 1/0
R/W
PG2MD0 0
R/W
PG1MD1 1/0
R/W
PG1MD0 0
R/W
Description
Reserved
These bits are always read as 1. The write value
should always be 0.
Reserved
These bits are always read as 0. The write value
should always be 0.
PG5 Mode
00: Other function (See table 17.1)
01: Reserved (Setting prohibited)
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
PG4 Mode
00: Other function (See table 17.1)
01: Reserved (Setting prohibited)
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
PG3 Mode
00: Other function (See table 17.1)
01: Reserved (Setting prohibited)
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
PG2 Mode
00: Other function (See table 17.1)
01: Reserved (Setting prohibited)
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
PG1 Mode
00: Other function (See table 17.1)
01: Reserved (Setting prohibited)
10: Port input (Pull-up MOS: on)
11: Port input (Pull-up MOS: off)
Rev. 4.00, 03/04, page 472 of 660