SH7058 Datasheet, PDF (900/1130 Pages) Renesas Technology Corp – Renesas SuperHTM RISC engine

Bit 5
EE
0
1
Description
Programming has ended normally
Programming has ended abnormally (programming result is not guaranteed)
• Bit 4—Flash Key Register Error Detect (FK): Returns the check result of the value of FKEY
before the start of the programming processing.
Bit 4
FK
Description
0
FKEY setting is normal (FKEY = H'A5)
1
FKEY setting is error (FKEY = value other than H'A5)
• Bit 3—Unused: Returns 0.
• Bit 2—Write Data Address Detect (WD): When an address in the flash memory area is
specified as the start address of the storage destination of the program data, an error occurs.
Bit 2
WD
Description
0
Setting of write data address is normal
1
Setting of write data address is abnormal
• Bit 1—Write Address Error Detect (WA): When the following items are specified as the start
address of the programming destination, an error occurs.
1. The programming destination address is an area other than flash memory
2. The specified address is not at the 128-byte boundary (A6 to A0 are not 0)
Bit 1
WA
0
1
Description
Setting of programming destination address is normal
Setting of programming destination address is abnormal
• Bit 0—Success/Fail (SF): Indicates whether the program processing has ended normally or
not.
Bit 0
SF
Description
0
Programming has ended normally (no error)
1
Programming has ended abnormally (error occurs)
Rev. 3.0, 09/04, page 859 of 1086