SH7058 Datasheet, PDF (21/1130 Pages) Renesas Technology Corp – Renesas SuperHTM RISC engine

Item
Page Revisions (See Manual for Details)
23.5.2 User Program Mode
872 Description amended
(2.3) VBR is cleared to 0 and 1 is written
to the SCO bit of FCCS, and then
download is executed.
If an access by the DMAC or AUD occurs during
download, operation cannot be guaranteed.
Therefore, access by the DMAC or AUD must not be
executed.
24.1 Overview
941 Description amended
On-chip RAM data can always be accessed in one
cycle for a read and two states for a write, making the
RAM ideal for use as a program area, stack area, or
data area, which require high-speed access.
25.1.3 Related Registers
945 Note amended
Table 25.3 Related Registers
1. Register access with an internal clock multiplication
ratio of 4 requires four internal clock (φ) cycles for
SBYCR, and four or five internal clock (φ) cycles for
SYSCR1 and SYSCR2.
27.2 DC Characteristics
Table 27.2 Correspondence between
Power Supply Names and Pins
959-
968
Description amended
Pin No. (FP-256H)
27.5 Flash Memory Characteristics
Table 27.20 Flash Memory
Characteristics
A.1 Address
Table A.1 Address
1001
1065
Table amended
Item
Programming time*¹*²*⁴
Erase time*¹*³*⁵
Reprogramming count
Symbol
t_P
t_E
N_WEC
Min Typ
−
3
−
2
100 −
Max
200
20
−
Unit
ms/128 bytes
s/block
Times
4. The total reprogramming time (programming time +
erasing time) is as follows.
40 s (typ.), reference value: 60 s, 80 s (max.)
However, 90% of the values are within the reference
value.
5. t , t distributes focusing on near the typ. value.
PE
Table amended
Register
Name
Abbrevi-
ation
Bit 7
H'FFFFF70A SYCSR2*¹ −
Bit Names
Bit 3 Bit 2 Bit 1
−
−
−
Bit 0
−
Appendix B Pin States
1080 Table amended
Table B.1 Pin States
Type
UBC
Pin Name
UBCTRG
AUD
Module
Standby
O
Appendix C Product Lineup
Table C.1 SH7058 F-ZTAT Product
Lineup
1083
Table amended
Product Type
Model Name
Mark Model
Name
Package
Operating
Temperature
(Except for W/E of
Flash Memory)
SH7058
F-ZTAT HD64F7058BF80L 64F7058F80 256-pin (FP-256H) -40˚C to 105°C
HD64F7058BF80K 64F7058F80 256-pin (FP-256H) -40˚C to 125°C
HD64F7058BP80L 64F7058BP80 272-pin (BP-272) -40˚C to 105°C
HD64F7058BP80K 64F7058BP80 272-pin (BP-272) -40˚C to 125°C
Rev. 3.0, 09/04, page xviii of xxxviii