|
SH7058 Datasheet, PDF (46/1130 Pages) Renesas Technology Corp – Renesas SuperHTM RISC engine | |||
|
◁ |
Table 1.1 SH7058 Features (cont)
Item
Watchdog timer
(WDT)
(1 channel)
Compare-match
timer (CMT)
(2 channels)
Features
⢠Can be switched between watchdog timer and interval timer function
⢠Internal reset, external signal, or interrupt generated by counter overflow
⢠Two kinds of internal reset
 Power-on reset
 Manual reset
⢠Selection of 4 counter input clocks
⢠A compare-match interrupt can be requested independently for each
channel
Serial
communication
interface (SCI)
(5 channels)
⢠Selection of asynchronous or synchronous mode
⢠Simultaneous transmission/reception (full-duplex) capability
⢠Serial data communication possible between multiple processors
(asynchronous mode)
⢠Clock inversion function
⢠LSB-/MSB-first selection function for transmission
Controller area
network-II
(HCAN-II)
(2 channels)
A/D converter
⢠CAN version: Bosch 2.0B active compatible
⢠Buffer size (per channel): Transmit/receive à 31, receive-only à 1
⢠Receive message filtering capability
⢠Thirty-two channels
⢠Three sample-and-hold circuits
 Independent operation of 12 channels à 2 and 8 channels à 1
⢠Selection of two conversion modes
 Single conversion mode
 Scan mode
⢠Continuous scan mode
⢠Single-cycle scan mode
⢠Can be activated by external trigger or ATU-II compare-match
⢠10-bit resolution
⢠Accuracy: ±2 LSB
Multi-trigger A/D
(MTAD)
⢠While performing conversion on the specified channels in scan mode, A/D
conversion on the channels for which conversion has been requested can
be performed prior to the other channels when a compare match occurs
with respect to the timer in the A/D converter
Rev. 3.0, 09/04, page 5 of 1086
|
▷ |