SH7058 Datasheet, PDF (350/1130 Pages) Renesas Technology Corp – Renesas SuperHTM RISC engine

Interval Interrupt Request Registers 2A and 2B (ITVRR2A, ITVRR2B)
Bit: 7
6
5
4
3
2
1
0
ITVA13x ITVA12x ITVA11x ITVA10x ITVE13x ITVE12x ITVE11x ITVE10x
Initial value: 0
0
0
0
0
0
0
0
R/W: R/W R/W R/W R/W R/W R/W R/W R/W
x = A or B
• Bit 7—A/D0 / A/D1 Converter Interval Activation Bit 13A/13B (ITVA13A/ITVA13B): A/D0
or A/D1 (ITVRR2A: A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to
bit 13 in TCNT0. The rise of bit 13 in TCNT0 is ANDed with ITVA13x, and the result is
output to the A/D0 or A/D1 converter as an activation signal.
Bit 7: ITVA13x
0
1
x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 13 is disabled
(Initial value)
A/D0 or A/D1 converter activation by rise of TCNT0 bit 13 is enabled
• Bit 6—A/D0 / A/D1 Converter Interval Activation Bit 12A/12B (ITVA12A/ITVA12B): A/D0
or A/D1 (ITVRR2A: A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to
bit 12 in TCNT0. The rise of bit 12 in TCNT0 is ANDed with ITVA12x, and the result is
output to the A/D0 or A/D1 converter as an activation signal.
Bit 6: ITVA12x
0
1
x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 12 is disabled
(Initial value)
A/D0 or A/D1 converter activation by rise of TCNT0 bit 12 is enabled
• Bit 5—A/D0 / A/D1 Converter Interval Activation Bit 11A/11B (ITVA11A/ITVA11B): A/D0
or A/D1 (ITVRR2A: A/D0; ITVRR2B: A/D1) converter activation setting bit corresponding to
bit 11 in TCNT0. The rise of bit 11 in TCNT0 is ANDed with ITVA11x, and the result is
output to the A/D0 or A/D1 converter as an activation signal.
Bit 5: ITVA11x
0
1
x = A or B
Description
A/D0 or A/D1 converter activation by rise of TCNT0 bit 11 is disabled
(Initial value)
A/D0 or A/D1 converter activation by rise of TCNT0 bit 11 is enabled
Rev. 3.0, 09/04, page 309 of 1086