SH7058 Datasheet, PDF (697/1130 Pages) Renesas Technology Corp – Renesas SuperHTM RISC engine

• Bit 2—Duty Select 1A or 0A (DTSEL1A or DTSEL0A): Selects either on-duty or off-duty for
the PWM output from ADTOxA of channel xA.
Bit 2:
DTSELxA
Description
0
On-duty for the PWM output from ADTOxA
1
Off-duty for the PWM output from ADTOxA
Note: x = 0 or 1.
(Initial value)
• Bit 1—A/D Data Select 1B (ADSEL1B): Selects the register to which the result of multi-
trigger A/D conversion is transferred.
This bit is inverted when the ADDR register is updated by the multi-trigger A/D conversion.
Switching settings during the multi-trigger A/D conversion operation should be carried out
when TADF1B (ADTSR1 register) is 1.
Bit 1:
ADSEL1B
0
1
Description
Conversion result is transferred to ADDR22
Conversion result is transferred to ADDR23
(Initial value)
• Bit 1—A/D Data Select 0B (ADSEL0B): Selects the register to which the result of multi-
trigger A/D conversion is transferred.
This bit is inverted when the ADDR register is updated by the multi-trigger A/D conversion.
Switching settings during the multi-trigger A/D conversion operation should be carried out
when TADF0B (ADTSR0 register) is set to 1.
Bit 1:
ADSEL0B
0
1
Description
Conversion result is transferred to ADDR10
Conversion result is transferred to ADDR11
(Initial value)
Rev. 3.0, 09/04, page 656 of 1086