SH7058 Datasheet, PDF (306/1130 Pages) Renesas Technology Corp – Renesas SuperHTM RISC engine

• Bit 6—Input Capture/Compare-Match Flag 2G (IMF2G): Status flag that indicates GR2G
input capture or compare-match.
Bit 6: IMF2G
0
1
Description
[Clearing condition]
(Initial value)
When IMF2G is read while set to 1, then 0 is written to IMF2G
[Setting conditions]
• When the TCNT2A value is transferred to GR2G by an input capture
signal while GR2G is functioning as an input capture register
• When TCNT2A = GR2G while GR2G is functioning as an output compare
register
• Bit 5—Input Capture/Compare-Match Flag 2F (IMF2F): Status flag that indicates GR2F input
capture or compare-match.
Bit 5: IMF2F
0
1
Description
[Clearing condition]
(Initial value)
When IMF2F is read while set to 1, then 0 is written to IMF2F
[Setting conditions]
• When the TCNT2A value is transferred to GR2F by an input capture
signal while GR2F is functioning as an input capture register
• When TCNT2A = GR2F while GR2F is functioning as an output compare
register
• Bit 4—Input Capture/Compare-Match Flag 2E (IMF2E): Status flag that indicates GR2E input
capture or compare-match.
Bit 4: IMF2E
0
1
Description
[Clearing condition]
(Initial value)
When IMF2E is read while set to 1, then 0 is written to IMF2E
[Setting conditions]
• When the TCNT2A value is transferred to GR2E by an input capture
signal while GR2E is functioning as an input capture register
• When TCNT2A = GR2E while GR2E is functioning as an output compare
register
Rev. 3.0, 09/04, page 265 of 1086