SH7032 Datasheet, PDF (463/687 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

Section 15 Pin Function Controller (PFC)
Bits 1 and 0—PA0 Mode (PA0MD1 and PA0MD0): PA0MD1 and PA0MD0 select the function
of the PA0/CS4/TIOCA0 pin.
Bit 1:
PA0MD1
0
1
Bit 0:
PA0MD0
0
1
0
1
Function
Input/output (PA0)
Chip select output (CS4)
ITU input capture/output compare (TIOCA0)
Reserved
(Initial value)
15.3.3 Port B I/O Register (PBIOR)
The port A I/O register (PAIOR) is a 16-bit read/write register that selects input or output for the
16 pins of port A. Bits PB15IOR–PB0IOR correspond to pins of port B. PBIOR is enabled when
the port B pins function as input/outputs (PB15–PB0), for ITU input capture and output compare
(TIOCA4, TIOCA3, TIOCA2, TIOCB4, TIOCB3, and TIOCB2), and as serial clocks (SCK1,
SCK0). For other functions, they are disabled. For port B pin functions PB15–PB0, and TIOCA4,
TIOCA3, TIOCA2, TIOCB4, TIOCB3, and TIOCB2, and SCK1/SCK0, a given pin in port B is an
output pin if its corresponding PBIOR bit is set to 1, and an input pin if the bit is cleared to 0.
PBIOR is initialized to H'0000 by a power-on reset; however, it is not initialized by a manual
reset, or in standby mode or sleep mode.
Bit
Initial value
Read/Write
15
14
13
12
11
10
9
8
PB15 PB14 PB13 PB12 PB11 PB10 PB9
PB8
IOR
IOR
IOR
IOR
IOR
IOR
IOR
IOR
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Bit
Initial value
Read/Write
7
6
5
4
3
2
1
0
PB7
PB6
PB5
PB4
PB3
PB2
PB1
PB0
IOR
IOR
IOR
IOR
IOR
IOR
IOR
IOR
0
0
0
0
0
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Rev. 7.00 Jan 31, 2006 page 437 of 658
REJ09B0272-0700