SH7032 Datasheet, PDF (460/687 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

Section 15 Pin Function Controller (PFC)
Bits 7 and 6—PA11 Mode (PA11MD1 and PA11MD0): PA11MD1 and PA11MD0 select the
function of the PA11/DPH/TIOCB1 pin.
Bit 7:
PA11MD1
0
1
Bit 6:
PA11MD0
0
1
0
1
Function
Input/output (PA11)
Upper data bus parity input/output (DPH)
ITU input capture/output compare (TIOCB1)
Reserved
(Initial value)
Bits 5 and 4—PA10 Mode (PA10MD1 and PA10MD0): PA10MD1 and MA10MD0 select the
function of the PA10/DPL/TIOCA1 pin.
Bit 5:
PA10MD1
0
1
Bit 4:
PA10MD0
0
1
0
1
Function
Input/output (PA10)
Lower data bus parity input/output (DPL)
ITU input capture/output compare (TIOCA1)
Reserved
(Initial value)
Bits 3 and 2—PA9 Mode (PA9MD1 and PA9MD0): PA9MD1 and PA9MD0 select the function
of the PA9/AH/IRQOUT/ADTRG pin.
Bit 3:
PA9MD1
0
1
Bit 2:
PA9MD0
0
1
0
1
Function
Input/output (PA9)
Address hold output (AH)
A/D conversion trigger input (ADTRG)
Interrupt request output (IRQOUT)
(Initial value)
Bit 1—Reserved: This bit is always read as 1. The write value should always be 1.
Bit 0—PA8 Mode (PA8MD): PA8MD selects the function of the PA8/BREQ pin.
Bit 0: PA8MD
0
1
Function
Input/output (PA8)
Bus request input (BREQ)
(Initial value)
Rev. 7.00 Jan 31, 2006 page 434 of 658
REJ09B0272-0700