SH7032 Datasheet, PDF (168/687 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer

Section 8 Bus State Controller (BSC)
T1
Tw (wait state)
T2
CK
A21–A0
CSn
Read
RD
AD15–AD0
Write
WRH, WRL
AD15–AD0
WAIT
Figure 8.13 Wait State Timing for External Memory Space Access (2 States Plus Wait
States from WAIT Signal)
Areas 0, 2, and 6 have long wait functions. When the corresponding bits in WCR1 and WCR2 are
cleared to 0, the access cycle is 1 state plus the number of long wait states (set in WCR3,
selectable between 1 and 4) and the WAIT pin input signal is not sampled. When the bits are set to
1, the WAIT signal is sampled and the number of states is 1 plus the number of long wait states
plus the number of wait states set by the WAIT signal. The WAIT signal is sampled at the rise of
the system clock (CK) directly preceding the last long wait state and the wait states are inserted as
long as the level is low. When a high level is detected, it shifts to the final long wait state. Figure
8.14 shows the wait state timing when accessing the external memory spaces of areas 0, 2, and 6.
Rev. 7.00 Jan 31, 2006 page 142 of 658
REJ09B0272-0700