PIC18LF24K Datasheet, PDF (459/594 Pages) –

PIC18(L)F26/45/46K40
REGISTER 31-32: ADACT: ADC AUTO CONVERSION TRIGGER CONTROL REGISTER
U-0
U-0
U-0
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
—
—
—
ADACT<4:0>
bit 7
R/W-0/0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-5
bit 4-0
Unimplemented: Read as ‘0’
ADACT<4:0>: Auto-Conversion Trigger Select Bits
11111 = Software write to ADPCH
11110 = Reserved, do not use
11101 = Software read of ADRESH
11100 = Software read of ADERRH
11011 = Reserved, do not use



10000 = Reserved, do not use
01111 = Interrupt-on-change Interrupt Flag
01110 = C2_out
01101 = C1_out
01100 = PWM4_out
01011 = PWM3_out
01010 = CCP2_trigger
01001 = CCP1_trigger
01000 = TMR6_postscaled
00111 = TMR5_overflow
00110 = TMR4_postscaled
00101 = TMR3_overflow
00100 = TMR2_postscaled
00011 = TMR1_overflow
00010 = TMR0_overflow
00001 = Pin selected by ADACTPPS
00000 = External Trigger Disabled
 2016 Microchip Technology Inc.
Preliminary
DS40001816C-page 459