PIC18LF24K Datasheet, PDF (420/594 Pages) –

PIC18(L)F26/45/46K40
29.4 ADC Acquisition Time
To ensure accurate temperature measurements, the
user must wait at least 200 s after the ADC input
multiplexer is connected to the temperature indicator
output before the conversion is performed. In addition,
the user must wait 200 s between consecutive
conversions of the temperature indicator output.
TABLE 29-2: SUMMARY OF REGISTERS ASSOCIATED WITH THE TEMPERATURE INDICATOR
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Register
on page
FVRCON FVREN FVRRDY TSEN TSRNG
CDFVR<1:0>
ADFVR<1:0>
418
Legend: — = Unimplemented location, read as ‘0’. Shaded cells are unused by the temperature indicator module.
 2016 Microchip Technology Inc.
Preliminary
DS40001816C-page 420