PIC18LF24K Datasheet, PDF (39/594 Pages) –

PIC18(L)F26/45/46K40
REGISTER 4-4: OSCSTAT: OSCILLATOR STATUS REGISTER 1
R-q/q
R-q/q
R-q/q
R-q/q
R-q/q
R-q/q
U-0
R-q/q
EXTOR
HFOR
MFOR
LFOR
SOR
ADOR
—
PLLR
bit 7
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
q = Reset value is determined by hardware
bit 7
EXTOR: EXTOSC (external) Oscillator Ready bit
1 = The oscillator is ready to be used
0 = The oscillator is not enabled, or is not yet ready to be used
bit 6
HFOR: HFINTOSC Oscillator Ready bit
1 = The oscillator is ready to be used
0 = The oscillator is not enabled, or is not yet ready to be used
bit 5
MFOR: MFINTOSC Oscillator Ready
1 = The oscillator is ready to be used
0 = The oscillator is not enabled, or is not yet ready to be used
bit 4
LFOR: LFINTOSC Oscillator Ready bit
1 = The oscillator is ready to be used
0 = The oscillator is not enabled, or is not yet ready to be used
bit 3
SOR: Secondary (Timer1) Oscillator Ready bit
1 = The oscillator is ready to be used
0 = The oscillator is not enabled, or is not yet ready to be used
bit 2
ADOR: ADC Oscillator Ready bit
1 = The oscillator is ready to be used
0 = The oscillator is not enabled, or is not yet ready to be used
bit 1
Unimplemented: Read as ‘0’
bit 0
PLLR: PLL is Ready bit
1 = The PLL is ready to be used
0 = The PLL is not enabled, the required input source is not ready, or the PLL is not locked.
 2016 Microchip Technology Inc.
Preliminary
DS40001816C-page 39