PIC18LF24K Datasheet, PDF (215/594 Pages) –

PIC18(L)F26/45/46K40
17.8 Register Definitions: PPS Input Selection
REGISTER 17-1:
U-0
—
xxxPPS: PERIPHERAL xxx INPUT SELECTION
U-0
U-0
R/W-m/u⁽¹⁾ R/W-m/u⁽¹⁾ R/W-m/u⁽¹⁾
—
—
xxxPPS<4:0>
R/W-m/u⁽¹⁾
bit 7
R/W-m/u⁽¹⁾
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
U = Unimplemented bit,
read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
q = value depends on peripheral
m = value depends on default location for that input
bit 7-5
bit 4-3
bit 2-0
Unimplemented: Read as ‘0’
xxxPPS<4:3>: Peripheral xxx Input PORTx Pin Selection bits
See Table 17-1 for the list of available ports and default pin locations.
11 = PORTD (PIC18(L)F4xK40 only)
10 = PORTC
01 = PORTB
00 = PORTA
xxxPPS<2:0>: Peripheral xxx Input PORTx Pin Selection bits
111 = Peripheral input is from PORTx Pin 7 (Rx7)
110 = Peripheral input is from PORTx Pin 6 (Rx6)
101 = Peripheral input is from PORTx Pin 5 (Rx5)
100 = Peripheral input is from PORTx Pin 4 (Rx4)
011 = Peripheral input is from PORTx Pin 3 (Rx3)
010 = Peripheral input is from PORTx Pin 2 (Rx2)
001 = Peripheral input is from PORTx Pin 1 (Rx1)
000 = Peripheral input is from PORTx Pin 0 (Rx0)
Note 1: The Reset value ‘m’ of this register is determined by device default locations for that input.
 2016 Microchip Technology Inc.
Preliminary
DS40001816C-page 215