PIC18LF24K Datasheet, PDF (452/594 Pages) –

PIC18(L)F26/45/46K40
REGISTER 31-13: ADCNT: ADC REPEAT COUNTER REGISTER
R/W-x/u
R/W-x/u
R/W-x/u
R/W-x/u
R/W-x/u
R/W-x/u
ADCNT<7:0>
bit 7
R/W-x/u
R/W-x/u
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
ADCNT<7:0>: ADC Repeat Count bits
Determines the number of times that the ADC is triggered before the threshold is checked when the
computation is Low-pass Filter, Burst Average, or Average modes. See Table 31-2 for more details.
REGISTER 31-14: ADFLTRH: ADC FILTER HIGH BYTE REGISTER
R-x
R-x
R-x
R-x
R-x
R-x
R-x
R-x
ADFLTR<15:8>
bit 7
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
ADFLTR<15:8>: ADC Filter Output Most Significant bits
In Accumulate, Average, and Burst Average mode, this is equal to ADACC right shifted by the ADCRS
bits of ADCON2. In LPF mode, this is the output of the Low-pass Filter.
REGISTER 31-15: ADFLTRL: ADC FILTER LOW BYTE REGISTER
R-x
R-x
R-x
R-x
R-x
R-x
R-x
R-x
ADFLTR<7:0>
bit 7
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-0
ADFLTR<7:0>: ADC Filter Output Least Significant bits
In Accumulate, Average, and Burst Average mode, this is equal to ADACC right shifted by the ADCRS
bits of ADCON2. In LPF mode, this is the output of the Low-pass Filter.
 2016 Microchip Technology Inc.
Preliminary
DS40001816C-page 452