SH7047 Datasheet, PDF (626/764 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTMRISC engine Family/SH7000 Series

22.3.3 Data Register (SDDR)
The data register (SDDR) comprises data register H (SDDRH) and data register L (SDDRL).
SDDRH and SDDRL are 16-bit registers that can be read and written to by the CPU. SDDR is
connected to TDO and TDI for serial data transfer to and from an external device.
32-bit data is input and output in serial data transfer. If data exceeding 32 bits is input, only the
last 32 bits will be stored in SDDR. Serial data is input starting with the MSB of SDDR (bit 15 of
SDDRH), and output starting with the LSB (bit 0 of SDDRL).
SDDR is not initialized by a reset, in hardware or software standby mode, or by the TRST signal.
The initial value of SDDR is undefined.
22.3.4 Bypass Register (SDBPR)
The bypass register (SDBPR) is a one-bit shift register. In bypass mode, SDBPR is connected to
TDI and TDO, and this LSI is bypassed in a board test. SDBPR cannot be read or written to by the
CPU.
Rev. 2.00, 09/04, page 586 of 720