SH7047 Datasheet, PDF (306/764 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTMRISC engine Family/SH7000 Series

10.7.10 Contention between Buffer Register Write and Input Capture
If an input capture signal is generated in the T2 state of a buffer register write cycle, the buffer
operation takes precedence and the write to the buffer register is not performed.
Figure 10.78 shows the timing in this case.
Pφ
Address
Write signal
Input capture
signal
TCNT
Buffer register write cycle
T1 T2
Buffer register
address
N
TGR
M
N
Buffer register
M
Figure 10.78 Contention between Buffer Register Write and Input Capture
10.7.11 TCNT2 Write and Overflow/Underflow Contention in Cascade Connection
With timer counters TCNT1 and TCNT2 in a cascade connection, when a contention occurs
during TCNT_1 count (during a TCNT_2 overflow/underflow) in the T₂ state of the TCNT_2
write cycle, the write to TCNT_2 is conducted, and the TCNT_1 count signal is disabled. At this
point, if there is match with TGRA_1 and the TCNT_1 value, a compare signal is issued.
Furthermore, when the TCNT_1 count clock is selected as the input capture source of channel 0,
TGRA_0 to D_0 carry out the input capture operation. In addition, when the compare match/input
capture is selected as the input capture source of TGRB_1, TGRB_1 carries out input capture
operation. The timing is shown in Figure 10.79.
For cascade connections, be sure to synchronize settings for channels 1 and 2 when setting TCNT
clearing.
Rev. 2.00, 09/04, page 266 of 720