SH7047 Datasheet, PDF (207/764 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTMRISC engine Family/SH7000 Series

Table 10.13 TIORL_0 (channel 0)
Description
Bit 3 Bit 2 Bit 1 Bit 0 TGRC_0
IOC3 IOC2 IOC1 IOC0 Function
TIOC0C Pin Function
0
0
0
0
Output
Output hold*¹
1
compare
Initial output is 0
register
0 output at compare match
1
0
Initial output is 0
1 output at compare match
1
Initial output is 0
Toggle output at compare match
1
0
0
Output hold
1
Initial output is 1
0 output at compare match
1
0
Initial output is 1
1 output at compare match
1
Initial output is 1
Toggle output at compare match
1
0
0
0
Input
Input capture at rising edge
1
capture
register*²
Input capture at falling edge
1
X
Input capture at both edges
1
X
X
Capture input source is channel 1/count clock
Input capture at TCNT_1 count-up/count-down
[Legend]
X: Don’t care
Notes: 1. The low level output is retained until TIOR contents is specified after a power-on reset.
2. When the BFA bit in TMDR_0 is set to 1 and TGRC_0 is used as a buffer register, this
setting is invalid and input capture/output compare is not generated.
Rev. 2.00, 09/04, page 167 of 720