HD6432345 Datasheet, PDF (631/907 Pages) Hitachi Semiconductor – H8S/2345 F-ZTAT Hardware Manual

Bit 7—ø Clock Output Disable (PSTOP): Controls ø output.
Bit 7
PSTOP
0
1
Normal Operating
Mode
ø output (initial value)
Fixed high
Description
Sleep Mode
ø output
Fixed high
Software Standby
Mode
Fixed high
Fixed high
Hardware Standby
Mode
High impedance
High impedance
Bits 6—Reserved: This bit can be read or written to, but only 0 should be written.
Bits 5 to 3—Reserved: Read-only bits, always read as 0.
Bits 2 to 0—System Clock Select (SCK2 to SCK0): These bits select the clock for the bus
master.
Bit 2
SCK2
0
1
Bit 1
SCK1
0
1
0
1
Bit 0
SCK0
0
1
0
1
0
1
—
Description
Bus master in high-speed mode
Medium-speed clock is ø/2
Medium-speed clock is ø/4
Medium-speed clock is ø/8
Medium-speed clock is ø/16
Medium-speed clock is ø/32
—
(Initial value)
19.2.3 Module Stop Control Register (MSTPCR)
MSTPCRH
MSTPCRL
Bit
: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1
R/W
: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
621