HD6432345 Datasheet, PDF (209/907 Pages) Hitachi Semiconductor – H8S/2345 F-ZTAT Hardware Manual

7.3.6 Repeat Mode
In repeat mode, one operation transfers one byte or one word of data.
From 1 to 256 transfers can be specified. Once the specified number of transfers have ended, the
initial state of the transfer counter and the address register specified as the repeat area is restored,
and transfer is repeated. In repeat mode the transfer counter value does not reach H'00, and
therefore CPU interrupts cannot be requested when DISEL = 0.
Table 7.6 lists the register information in repeat mode and figure 7.7 shows memory mapping in
repeat mode.
Table 7.6 Register Information in Repeat Mode
Name
DTC source address register
DTC destination address register
DTC transfer count register AH
DTC transfer count register AL
DTC transfer count register B
Abbreviation
SAR
DAR
CRAH
CRAL
CRB
Function
Designates source address
Designates destination address
Holds number of transfers
Designates transfer count (8 bits × 2)
Not used
SAR or
DAR
Repeat area
Transfer
DAR or
SAR
Figure 7.7 Memory Mapping in Repeat Mode
191