HD6432345 Datasheet, PDF (238/907 Pages) Hitachi Semiconductor – H8S/2345 F-ZTAT Hardware Manual

Port 2 Register (PORT2)
Bit
:
7
6
5
4
3
2
1
0
P27
P26
P25
P24
P23
P22
P21
P20
Initial value : —*
—*
—*
—*
—*
—*
—*
—*
R/W
:
R
R
R
R
R
R
R
R
Note: * Determined by state of pins P27 to P20.
PORT2 is an 8-bit read-only register that shows the pin states. It cannot be written to. Writing of
output data for the port 2 pins (P2₇ to P2₀) must always be performed on P2DR.
If a port 2 read is performed while P2DDR bits are set to 1, the P2DR values are read. If a port 2
read is performed while P2DDR bits are cleared to 0, the pin states are read.
After a power-on reset and in hardware standby mode, PORT2 contents are determined by the pin
states, as P2DDR and P2DR are initialized. PORT2 retains its prior state after a manual reset, and
in software standby mode.
8.3.3 Pin Functions
Port 2 pins also function as TPU I/O pins (TIOCA3, TIOCB3, TIOCC3, TIOCD3, TIOCA4,
TIOCB4, TIOCA5, and TIOCB5), and 8-bit timer I/O pins (TMRI0, TMCI0, TMO0, TMRI1,
TMCI1, and TMO1). Port 2 pin functions are shown in table 8.5.
221