HD6432345 Datasheet, PDF (492/907 Pages) Hitachi Semiconductor – H8S/2345 F-ZTAT Hardware Manual

Bit 1—Reserved: Read-only bit, always read as 1.
Bit 0—Smart Card Interface Mode Select (SMIF): Enables or disables the Smart Card interface
function.
Bit 0
SMIF
0
1
Description
Smart Card interface function is disabled
Smart Card interface function is enabled
(Initial value)
13.2.2 Serial Status Register (SSR)
Bit
:
Initial value :
R/W
:
7
TDRE
1
R/(W)*
6
RDRF
0
R/(W)*
5
ORER
0
R/(W)*
4
ERS
0
R/(W)*
3
PER
0
R/(W)*
2
TEND
1
R
1
MPB
0
R
0
MPBT
0
R/W
Note: * Only 0 can be written to bits 7 to 3, to clear these flags.
Bit 4 of SSR has a different function in Smart Card interface mode. Coupled with this, the setting
conditions for bit 2, TEND, are also different.
Bits 7 to 5—Operate in the same way as for the normal SCI. For details, see section 12.2.7, Serial
Status Register (SSR).
478