HD6432345 Datasheet, PDF (3/907 Pages) Hitachi Semiconductor – H8S/2345 F-ZTAT Hardware Manual

Main Amendments and Additions in this Edition
Page
Item
Revision
Throughout • H8S/2344, H8S/2341, and H8S/2340 added; F-ZTAT version of current H8S/2345
added. Generic name adopted: H8S/2345 Series, H8S/2345 F-ZTAT Hardware
Manual.
• Notes added where necessary indicating that the H8S/2340 is a ROMless version,
and only supports MCU operating modes 1, 4, and 5.
• Notes added where necessary indicating that the H8S/2345 F-ZTAT version only
supports MCU operating modes 4 to 7, 10, 11, 14, and 15 (and that modes 1 to 3
(normal modes) cannot be used).
• Notes added where necessary indicating that the FWE pin applies only to the F-
ZTAT version, and that this pin is WDTOVF in the ZTAT, mask ROM, and ROMless
versions.
• Notes added where necessary indicating that the TFP-100G package is under
development.
1 to 5
1.1 Overview
Amended (Information on newly added
products)
9 to 13
Table 1.2 Pin Functions in Each
Operating Mode
Amended
• PROM mode pin names partially
changed
• Flash memory mode pin names added
14 to 20 Table 1.3 Pin Functions
Amended
• Addition of F-ZTAT version operating
mode settings by pins MD2-MD0
• FWE pin description added
69 to 72 3.1 Overview
Amended (Description of F-ZTAT and
ROMless versions added)
74
System Control Register 2 (SYSCR2) (F- New
ZTAT Version Only)
76
3.3.7 Mode 7
Note 2 amended
76, 77
3.3.8 Mode 8 to 3.3.13 Mode 15
New
78
Table 3.3 Pin Functions in Each Mode Amended (Mode 10, 11, 14, and 15 pin
descriptions added)
79 to 90
107
141
3.5 Memory Map in Each Operating Mode Amended (Information on newly added
products)
Table 5.3 Correspondence between
Interrupt Sources and IPR Settings
Note amended
6.2.5 Bus Control Register L (BCRL)
Description of bit 5 amended