SH7203 Datasheet, PDF (1625/1686 Pages) Renesas Technology Corp – 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7200 Series

Section 31 Electrical Characteristics
31.4.19 AC Characteristics Measurement Conditions
• I/O signal reference level: PV_CC/2 (PV_CC = 3.0 to 3.6 V, V_CC = 1.1 to 1.3 V)
• Input pulse level: PV_SS to 3.0 V (where RES, MRES, NMI, MD, MD_CLK1, MD_CLK0,
ASEMD, TRST, and Schmitt trigger input pins are within PV_SS to PV_CC.)
• Input rise and fall times: 1 ns
LSI output pin
Measurement point
C_L
CMOS output
Notes:
1. C_L is the total value that includes the capacitance of measurement
tools. Each pin is set as follows:
30 pF: CKIO, RASU, RASL, CASU, CASL, CS0 to CS7, and BACK
50 pF: All other pins
2. I_{OL and} I_OH are shown in table 31.3.
Figure 31.82 Output Load Circuit
Rev. 2.00 Apr. 16, 2008 Page 1595 of 1652
REJ09B0313-0200