D12320VF25V Datasheet, PDF (87/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 2 CPU
Type
Instruction Size Function
Block data
transfer
instruction
EEPMOV.B —
if R4L ≠ 0 then
Repeat @ER5+ → @ER6+
R4L–1 → R4L
Until R4L = 0
else next;
EEPMOV.W —
if R4 ≠ 0 then
Repeat @ER5+ → @ER6+
R4–1 → R4
Until R4 = 0
else next;
Transfers a data block according to parameters set in
general registers R4L or R4, ER5, and ER6.
R4L or R4: size of block (bytes)
ER5: starting source address
ER6: starting destination address
Execution of the next instruction begins as soon as the
transfer is completed.
Notes: 1. Size refers to the operand size.
B: Byte
W: Word
L: Longword
2. Only register ER0, ER1, ER4, or ER5 should be used when using the TAS instruction.
Rev.7.00 Feb. 14, 2007 page 53 of 1108
REJ09B0089-0700