D12320VF25V Datasheet, PDF (13/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Item
17.24.2 User
Program Mode
Page
729
730
17.25 Protection 738
17.29.1 Serial
754
Communication
Interface
Specification for Boot
Mode
759
760
Revision (See Manual for Details)
Programming Procedure in User Program Mode:
Description amended
(g) Initialization
• The general registers other than ER0 and ER1 are saved in
the initialization program.
(l) Programming
• The general registers other than ER0 and ER1 are saved in
the programming program.
Description amended
There are three kinds of flash memory program/erase
protection: hardware, software protection, and error protection.
Status
Description amended
(2) Inquiry/Selection State
... required for erasure to the on-chip RAM and erases ...
(3) Programming/erasing state
... the programming/erasing programs to the on-chip RAM by
commands ...
Inquiry and Selection States
Description amended
(2) Device Selection
• Size (1 byte): Amount of device-code data
This is fixed to 4
(3) Clock Mode Inquiry
(Before)
Response H'31 Size A number of modes Mode SUM
(After)
Response H'31 Size Mode SUM
• Size (1 byte): Amount of data that represents the modes
• Mode (1 byte): Values of the supported ...
Rev.7.00 Feb. 14, 2007 page xi of xxxii
REJ09B0089-0700