|
D12320VF25V Datasheet, PDF (321/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents | |||
|
◁ |
Port Function Control Register 2 (PFCR2)
Bit
:
7
â
Initial value :
0
R/W
: R/W
6
5
4
3
â CS167E CS25E ASOD
0
1
1
0
R/W
R/W
R/W
R/W
Section 8 I/O Ports
2
1
0
â
â
â
0
0
0
R
R
R
PFCR2 is an 8-bit readable/writable register that performs I/O port control. PFCR2 is initialized to
H'30 by a reset, and in hardware standby mode.
Bits 7 and 6âReserved: Only 0 should be written to these bits.
Bit 5âCS167 Enable (CS167E): Enables or disables CS1, CS6, and CS7 output. For details, see
section 8.12, Port G.
Bit 4âCS25 Enable (CS25E): Enables or disables CS2, CS3, CS4, and CS5 output. Change the
CS25E setting only when the DDR bits are cleared to 0. This bit is valid in modes 4 to 6.
Bit 4
CS25E
0
1
Description
CS2, CS3, CS4, and CS5 output disabled (can be used as I/O ports)
CS2, CS3, CS4, and CS5 output enabled
(Initial value)
Bit 3âAS Output Disable (ASOD): Enables or disables AS output. This bit is valid in modes 4
to 6.
Bit 3
ASOD
0
1
Description
PF6 is used as AS output pin
(Initial value)
PF6 is designated as I/O port, and does not function as AS output pin
Bits 2 to 0âReserved: When read, these bits are always read as 0.
Rev.7.00 Feb. 14, 2007 page 287 of 1108
REJ09B0089-0700
|
▷ |