D12320VF25V Datasheet, PDF (449/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 11 Watchdog Timer
Section 11 Watchdog Timer
11.1 Overview
The chip has a single-channel on-chip watchdog timer (WDT) for monitoring system operation.
The WDT outputs an overflow signal (WDTOVF)* if a system crash prevents the CPU from
writing to the timer counter, allowing it to overflow. At the same time, the WDT can also generate
an internal reset signal for the chip.
When this watchdog function is not needed, the WDT can be used as an interval timer. In interval
timer operation, an interval timer interrupt is generated each time the counter overflows.
Note: * The WDTOVF function is not available in the F-ZTAT versions.
11.1.1 Features
WDT features are listed below.
• Switchable between watchdog timer mode and interval timer mode
• WDTOVF output when in watchdog timer mode*
If the counter overflows, the WDT outputs WDTOVF. It is possible to select whether or not
the entire chip is reset at the same time
• Interrupt generation when in interval timer mode
If the counter overflows, the WDT generates an interval timer interrupt
• Choice of eight counter clock sources
Note: * The WDTOVF function is not available in the F-ZTAT versions.
Rev.7.00 Feb. 14, 2007 page 415 of 1108
REJ09B0089-0700