D12320VF25V Datasheet, PDF (371/1146 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 9 16-Bit Timer Pulse Unit (TPU)
9.2.7
Bit
Timer General Registers (TGR)
: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
R/W
: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
The TGR registers are 16-bit registers with a dual function as output compare and input capture
registers. The TPU has 16 TGR registers, four each for channels 0 and 3 and two each for channels
1, 2, 4, and 5. TGRC and TGRD for channels 0 and 3 can also be designated for operation as
buffer registers*. The TGR registers are initialized to H'FFFF by a reset and in hardware standby
mode.
The TGR registers cannot be accessed in 8-bit units; they must always be accessed as a 16-bit unit.
Note: * TGR buffer register combinations are TGRA—TGRC and TGRB—TGRD.
9.2.8 Timer Start Register (TSTR)
Bit
:
7
—
Initial value :
0
R/W
:—
6
5
—
CST5
0
0
—
R/W
4
CST4
0
R/W
3
CST3
0
R/W
2
CST2
0
R/W
1
CST1
0
R/W
0
CST0
0
R/W
TSTR is an 8-bit readable/writable register that selects operation/stoppage for channels 0 to 5.
TSTR is initialized to H'00 by a reset, and in hardware standby mode. When setting the operating
mode in TMDR or setting the count clock in TCR, first stop the TCNT counter.
Bits 7 and 6—Reserved: Must always be written with 0.
Rev.7.00 Feb. 14, 2007 page 337 of 1108
REJ09B0089-0700